Raised-panel steel
Carriage house
Modern flush
Full-view glass
LiftMaster openers
Chamberlain openersFull 25-point door and opener safety check with every visit - springs, cables, rollers, tracks, and your LiftMaster or Chamberlain opener included
You get a price before we start. It does not change when the truck arrives.
Get your free estimateStyles & brands we work with
See the difference
Before
After
Before
After
Before
AfterHow Much Does Panel Replacement Cost in San Bernardino?
Panel replacement in San Bernardino typically runs $250 to $500, with most single-panel jobs landing near the middle of that range. A standard bottom section on a single-car door is often the cheapest fix, while insulated double-car panels or custom colors push toward the top. We give free written estimates, so you’ll know your exact number before anyone touches the door.
One thing we say up front: a dented or rusted panel is a repair, not a rebuild. If the rest of the door is sound, swapping the damaged section is almost always the smarter move. Read on for what drives the price in San Bernardino specifically, or call (855) 763-8905 to get a same-day quote.
Panel Replacement Cost Breakdown (2026)
Here’s how the math works out for a typical San Bernardino garage door. Prices reflect what we see on jobs across the city, from the older homes near downtown to the newer builds out in the north end.
| Job | Typical Cost |
|---|---|
| Single bottom panel (steel, non-insulated) | $250 – $320 |
| Single panel (insulated, double-car width) | $320 – $420 |
| Custom color match or specialty finish | $380 – $500 |
| Two or more panels replaced | $400 – $500+ |
| Panel plus roller or hinge replacement | $290 – $480 |
The single biggest swing factor is panel type. A basic non-insulated steel panel for a single-car door is at the low end. An insulated double-car panel in a color that has to be matched to a door that’s spent a few years in the Southern California sun costs more. Labor stays in a narrow band because a panel swap is a focused job. What moves the number is whether we’re pulling one section or three, and whether the hardware around it needs replacing while we’re in there.
What Affects Panel Replacement Pricing in San Bernardino
A few things unique to this market push the price around more than most homeowners expect.
- Panel width and door size. A single-car door uses narrower panels than a double-car door, and the difference in material cost is real. Most San Bernardino homes have either a single 8-to-9-foot door or a 16-foot double, and the double runs higher per panel.
- Insulation and gauge. Thin 24-gauge steel covers a lot of installed doors here; a step up to 27-gauge or an insulated core adds cost but handles the inland heat better. If your door faces west and bakes all afternoon, that matters.
- Color matching. Sun exposure fades and oxidizes older doors. Even a factory color in the right name may not match a door that’s been up for ten or fifteen years. We tell customers to expect some variation, or plan to replace a full row for a clean look.
- Panel availability by brand. Clopay, Amarr, Wayne Dalton, and Raynor panels aren’t universal. We work on all of them, but the panel has to match the door’s profile and stamping. An older or discontinued door sometimes means a slightly higher panel cost because of sourcing.
- Wear discovered during the swap. Panels come off to reveal rollers, hinges, and the bottom seal. A 15-year-old door usually has rollers that are past their life. Adding roller replacement to the job adds $110 to $220, and it’s cheaper to do it in the same visit than to come back.
- Wind and heat cycles. The swing between hot days and cool desert nights works on the door’s alignment. If the panels are binding in the tracks, a track realignment ($120 to $240) may need to be part of the visit to keep the new panel straight.
Why We Handle Panel Replacement as a Door-Only Job
Garage doors are all we do. That focus matters for panel work because a panel isn’t a standalone piece of sheet metal. It’s part of a stamped, matched system, and the new section has to line up with the door’s hinges, tracks, and spring tension or it won’t ride straight.
We service and install eight of the most widely owned brands in North America: LiftMaster, Chamberlain, Genie, Clopay, Amarr, Wayne Dalton, Craftsman, and Raynor. That breadth means we can work on the door you already have instead of steering you toward something new because it’s the only line we carry. A Clopay door gets a Clopay-profile panel. A Wayne Dalton gets the right fit. No guesswork, and no generalist who splits his time across plumbing and doors.
If the panel issue has a cause underneath it, we catch it before we leave. A door that keeps denting at the bottom often has a track that’s out of plumb. One that’s dragging is usually a roller or hinge problem. We can flag any of that alongside the panel work, or if the damage is broad enough that the panels aren’t the real fix, the team at Panel Replacement in San Bernardino can walk you through options. For the full picture of what we do, see our home page.
How to Save on Panel Replacement in San Bernardino
None of these tips require much effort, and together they can put you toward the low end of the $250 to $500 range.
- Get the lever gauge checked. We don’t recommend guessing at spring tension by feel. What we can do is confirm the door is balanced when we’re out for the panel quote. A door that’s way out of balance puts extra strain on the new panel and the surrounding hardware.
- Bundle small fixes. If rollers or the bottom seal are due, adding them to the panel visit is a straight cost savings over a second call. Ask about it during the estimate.
- Replace the damaged row, not the door. The whole point of panel repair is that it’s a fraction of a full replacement ($700 to $2,200). Don’t let a salesperson talk you into a whole door for one dented section.
- Match what’s there. Ordering a panel in an existing color or profile is cheaper than a custom finish. If you’re open to it, ask what’s close.
- Call before weather gets worse. A rusted bottom panel holds water, and that water gets into the seal and the floor of the door. A small fix now stays small.
We give free estimates and upfront pricing, so there’s no surprise on the invoice. Call (855) 763-8905 to get a number for your door.
What to Know Before You Book a Panel Replacement
First, the safety part. Garage door springs and cables are under serious tension, and a panel swap involves a door that’s moving on those same springs. We’ve seen homeowners try to pull a bottom section off a door that wasn’t in a safe position, and it’s not a job for a ladder and a Sunday afternoon. Leave the springs and cables alone. A trained technician should confirm the door is safe to work on before the panel comes off. If you ever hear a loud bang from the garage or see a cable hanging loose, stop using the door and call us. (Here’s what we do for that: Garage Door Repair in San Bernardino.)
Second, expect a short window of a partially disassembled door. A single-panel swap is typically a same-day job, but if we’re matching a color and the panel has to be ordered, that can take a few days. We’ll tell you the timeline when we quote it.
Third, look at the door’s overall condition while we’re there. A panel can look fine and the opener can still be struggling. Because we handle Garage Door Opener Repair in San Bernardino and Garage Door Installation in San Bernardino, we can tell you whether a panel fix will last or whether the door is close to its end. From panel to opener to spring, it’s the same visit.
What we check on a panel replacement visit
- Door balance and spring condition (new panels don’t fix an unbalanced door).
- Track plumb and rail alignment.
- Hinge and roller condition where the new panel joins the old.
- Bottom seal and weather stripping.
- Panel profile and color match against the existing door.
Panel Replacement vs. Full Door Replacement
Not every damaged door needs a panel, and not every panel job is worth doing. Here’s the honest line.
- Fix the panel when the damage is isolated to one or two sections, the door tracks straight, and the springs are within their life.
- Replace the door when several panels are damaged, the door is older and out of balance, or the cost of matching discontinued panels gets close to the price of a new door.
Our cost range for panel work is $250 to $500. A full new door lands at $700 to $2,200, and an installation is the right call when the math tips. We’ll tell you which way the numbers point, and we mean it, because we don’t want you paying for a panel swap that doesn’t hold. If you’re weighing it, ask about a repair estimate and a replacement estimate together.
FAQs – Panel Replacement Cost in San Bernardino
How much does it cost to replace a garage door panel in San Bernardino?
Most panel replacements in San Bernardino cost $250 to $500. A single non-insulated steel panel sits near the low end; an insulated double-car panel or a custom color match lands higher. Call (855) 763-8905 for a free estimate on your specific door.
Is it cheaper to repair a panel or replace the whole door?
Repair is cheaper by a wide margin in most cases. A panel swap is $250 to $500, and a full door install starts at $700 and climbs to $2,200. Replacing the door makes sense only when several panels are damaged or the door is out of balance and near the end of its life.
Can you match the color of my existing door panels?
Usually yes. We work on the brand you already have, so a Clopay, Amarr, Wayne Dalton, or Raynor door gets the panel that matches its profile and factory color. Older doors sometimes show fading from sun exposure, so expect a close match rather than an invisible one. Ask us to bring a color sample to the estimate.
How long does a panel replacement take?
A single-panel swap is typically a same-day job, usually done in one visit once we’ve confirmed the door is safe to work on. If the panel has to be ordered to match your door, expect a few days of lead time. We’ll give you a real timeline with the quote.
Do you replace panels on LiftMaster, Genie, and Craftsman doors?
Yes. We service and install LiftMaster, Chamberlain, Genie, Clopay, Amarr, Wayne Dalton, Craftsman, and Raynor, so the panel gets matched to the door’s actual brand and profile. That includes the opener side, too, since we handle opener repair as its own service.
Get a Free Estimate on Your Panel Replacement
A dented bottom panel isn’t a reason to buy a whole new door. We’ll tell you what the fix actually costs for your door in San Bernardino, with a number up front and no guesswork. Call (855) 763-8905 for a free estimate. We work on the brand you already have, and garage doors are all we do.
Pricing reflects the San Bernardino market as of 2026. San Bernardino Garage Door Co offers free estimates – call (855) 763-8905.
What Our Customers Say
"Spring snapped at six in the morning with my car sealed inside and me due at work. Somebody was here by eight thirty with the right spring on the truck. Door's quieter now than it was before it broke."
— Vivian Kim"Logic board on a 15 year old opener. He was upfront that a new opener would cost less than the board plus labor, and he wasn't wrong. No pressure either way."
— Vikram Sharma"Fixed the spring properly and the door works fine. He did leave the old spring and some hardware by the side of the house, and I had to text to ask about hauling it off. They came back for it, just took a couple of days."
— Beatriz Guzman