Raised-panel steel
Carriage house
Modern flush
Full-view glass
LiftMaster openers
Chamberlain openersFull 25-point door and opener safety check with every visit - springs, cables, rollers, tracks, and your LiftMaster or Chamberlain opener included
You get a price before we start. It does not change when the truck arrives.
Get your free estimateGarage Door Company in Beverly Hills, CA
Garage door installation in Beverly Hills means working with homes that don’t fit a standard mold. From 1920s Spanish Colonials in the Flats to custom villas in the Hills, the doors here are wider, heavier, and often finished in wood, glass, or designer metal that has to match the rest of the property. We install, repair, and service garage doors across all four Beverly Hills ZIP codes, and we stock parts for LiftMaster, Chamberlain, and Genie openers on every truck. Call (855) 763-8905 for a free estimate on any garage door project.
Why Beverly Hills Homes Are Different
Beverly Hills has a higher density of custom and luxury garage doors than almost any other city its size. Wood, glass, and designer metal doors are common, and many sit on homes with zero lot-line setbacks and tight porte-cochère approaches. A service truck has to fit where a standard work vehicle barely squeezes, and the door itself often needs finish matching that goes beyond swapping hardware. In the Flats, original 1920s and 1930s garages are frequently detached at the rear of narrow lots with shared driveways, so we assess approach angle and clearance before opening the door. Some of those garages were converted years ago into guesthouses or gyms, which means the door is now a decorative façade hiding a finished room, and any work has to respect the interior behind it.
Climate matters here too. The mild, dry air spares Beverly Hills doors from rust and freeze damage that coastal or mountain homes contend with, but intense sun breaks down exterior wood and steel finishes. Santa Ana wind-driven dust works its way into tracks and rollers. And the clay soils under the city shift seasonally, which moves garage slabs just enough to pull tracks out of alignment. Doors that worked fine in June can bind by September, not because anything broke but because the ground beneath them moved.
Styles & brands we work with
Our Main Beverly Hills Services
Most Beverly Hills calls start with one of two problems: a door that won’t operate or an opener that quit responding. Both are jobs we handle every day, often on the same visit.
Garage Door Repair in Beverly Hills
Beverly Hills garages carry heavier custom doors than most, and that weight puts real strain on springs, cables, and tracks. A snapped spring on a solid wood door in the Hills is a different job than a snapped spring on a lightweight steel door in a standard tract home. We carry springs and cables sized for oversize doors, and we’ve worked around porte-cochères, below-grade parking levels, and shared driveways long enough to know how to set up safely before touching the door. Garage Door Repair in Beverly Hills covers springs, cables, tracks, rollers, panels, and off-track doors.
Garage Door Opener Repair in Beverly Hills
Opener repair is its own specialty, and in Beverly Hills the openers are often paired with integrated entry gates or non-standard drive systems installed years ago by a custom builder. We work on LiftMaster, Chamberlain, Genie, and Craftsman openers, and we treat the electronics, drive systems, and remotes as a full diagnostic job, not an afterthought to a spring replacement. If your opener hums but won’t move, or the remote works from ten feet but not thirty, the problem is usually specific and fixable. Garage Door Opener Repair in Beverly Hills covers the opener, remotes, keypads, and safety sensors.
What happens when you call
- 1
A real person answersNo phone trees — you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Garage Door Installation in Beverly Hills
Garage door installation in Beverly Hills rarely means dropping in a stock steel door. Homes here range from 1920s Spanish Colonials in the Flats to large custom villas in the Hills, and garages often have oversize custom doors, integrated entry gates, or below-grade parking levels that use non-standard track and opener systems. The clay soil under the city shifts seasonally, so a new door often needs track adjustment within the first year, and we account for that on install day. We handle full Garage Door Installation across Clopay and Amarr product lines, from residential replacement to custom-spec work.
Garage Door Replacement
Signs you need it
Your current door is warped, rusted through, cracked, or so far out of balance that repair costs would exceed half the price of a new door.
What it costs in Beverly Hills
New door installation in Beverly Hills typically runs $700 – $2200 depending on material, size, and whether we’re reusing the existing track and opener.
How we do it
We measure the opening, confirm slab level, remove the old door and hardware, install the new door and tracks, then test balance and operation before we leave.
Garage Door Installation Service
Signs you need it
You’re building a new garage, converting a carport, or replacing a converted garage façade with a functioning door again.
What it costs in Beverly Hills
Full installation service in Beverly Hills ranges $700 – $2200 for the door itself, with opener installation adding $250 – $550 when included.
How we do it
We survey the site, check approach clearances and slab pitch, install door and track to the opening’s actual dimensions, then set the opener and sensors.
Commercial Garage Door Installation
Signs you need it
Your building’s overhead door is dented, slow, or no longer seals, and repeated repairs are costing more than a replacement.
What it costs in Beverly Hills
Commercial door installation in Beverly Hills generally starts in the $700 – $2200 range and rises with door size, gauge, and motor requirements.
How we do it
We measure the opening and header clearance, match door gauge to use frequency, install door and heavy-duty track, and test full cycle with the opener.
Garage Door Seal Installation
Signs you need it
You see daylight under the door, feel drafts, or find dust and debris blowing in around the door’s bottom edge after Santa Ana winds.
What it costs in Beverly Hills
Seal installation in Beverly Hills is bundled with most service calls and generally runs within the $150 – $600 repair range when done on its own.
How we do it
We pull the old seal, clean the retainer channel, cut the new seal to width, and slide it into place, then check that the door closes flush to the slab.
What Garage Door Installation Costs in Beverly Hills
| Item | Typical range in Beverly Hills |
|---|---|
| New door installation | $700 – $2200 |
| Opener installation | $250 – $550 |
| Panel replacement | $250 – $500 |
Custom finishes, oversize doors, and below-grade installations push these numbers toward the upper end. Wood and glass doors with custom hardware cost more than standard steel. We quote every Beverly Hills installation before work starts, and the price we quote is the price you pay.
How long does garage door installation take in Beverly Hills?
A standard single-door replacement is usually done in one day. Custom doors, oversize openings, and below-grade installs in the Hills can take two days, mostly because track work and finish matching require more setup time.
Can you match my home’s existing door finish in Beverly Hills?
Yes. We work with Clopay and Amarr lines that include wood-look, glass, and designer finishes, and we can source hardware that matches Spanish Colonial, ranch, and custom villa styles across Beverly Hills. Call (855) 763-8905 to talk through what your existing door looks like.
Brands We Service in Beverly Hills
We work on the brand you already have. Most Beverly Hills garages have doors and openers from LiftMaster, Chamberlain, Genie, or Clopay, and we stock common parts for each on our trucks so repair work doesn’t stall waiting on a parts run. Our brands page breaks down what we service.
See the difference
Before
After
Before
After
Before
AfterPricing for Garage Door Company in Beverly Hills, CA
| Service | Typical range in Beverly Hills |
|---|---|
| Spring repair | $180 – $340 |
| Cable repair | $130 – $250 |
| Opener repair | $120 – $320 |
| Opener installation | $250 – $550 |
| Panel replacement | $250 – $500 |
| Track realignment | $120 – $240 |
| Roller replacement | $110 – $220 |
| New door installation | $700 – $2200 |
| General garage door repair | $150 – $600 |
Custom finishes, oversize doors, and non-standard track systems in Beverly Hills push most repairs toward the middle or upper end of these ranges. Every quote is given and agreed before any work starts, so you won’t see a different number when the invoice arrives.
Neighborhoods We Serve in Beverly Hills
We cover all four Beverly Hills ZIP codes: 90210, 90212, 90209, and 90213. From the Flats to the Hills, and across the narrow shared-driveway lots south of Santa Monica Boulevard, we’re working somewhere in Beverly Hills most days of the week. Typical response time across the city is same-day or next-morning for repair calls.
- The Flats
- Trousdale Estates
- Beverly Hills Gateway
- Beverlywood adjacent
- South of Santa Monica Boulevard
Service Area – Cities Near Beverly Hills
We run service calls from San Bernardino through the Westside, which puts us in Beverly Hills and the surrounding cities on the same schedule. Homeowners in Century City, CA, West Hollywood, CA, Culver City, CA, and Hollywood, CA call us for the same brand-specific garage door work we do in Beverly Hills.
Serving Beverly Hills, CA — Our Local Coverage Area
We’re based in the Beverly Hills area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Garage Door Company in Beverly Hills
We route Beverly Hills repair calls same-day whenever possible, and next-morning at the latest. Our techs carry parts for LiftMaster, Chamberlain, and Genie openers plus a range of spring and cable sizes, so most jobs finish in one visit. Call (855) 763-8905 to check today’s schedule.
Most straight door replacements don’t require a permit, but Beverly Hills has strict design standards for visible changes, especially on custom or historic-style homes. We’ll tell you what you need before work starts, and we handle the door and track so the finished look respects the property.
Yes, and we see them regularly. When a 1920s detached garage in the Flats has been turned into a guesthouse or gym, the door is often a decorative façade, and we work carefully around the finished interior. Panels, trim, and seals get matched to what’s already there.
What happens when you call
- 1A real person answersNo phone trees — talk to a local garage door pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you — the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Beverly Hills Customers Say
"Logic board on a 15 year old opener. He was upfront that a new opener would cost less than the board plus labor, and he wasn't wrong. No pressure either way."
— Vikram Sharma"Fixed the spring properly and the door works fine. He did leave the old spring and some hardware by the side of the house, and I had to text to ask about hauling it off. They came back for it, just took a couple of days."
— Beatriz Guzman"The old chain drive sounded like a freight train through the bedroom above the garage. Went with the belt drive they recommended and now I genuinely cannot hear it open from upstairs."
— Marco Flores