Raised-panel steel
Carriage house
Modern flush
Full-view glass
LiftMaster openers
Chamberlain openersFull 25-point door and opener safety check with every visit - springs, cables, rollers, tracks, and your LiftMaster or Chamberlain opener included
You get a price before we start. It does not change when the truck arrives.
Get your free estimateGarage Door Company in Manhattan Beach, CA
Garage Door Installation in Manhattan Beach means fitting a door that can hold up to salt air, marine layer humidity, and the wide custom openings that come with 1950s bungalow rebuilds. We’re San Bernardino Garage Door Co, and garage doors are all we do. We install Clopay, Amarr, and Wayne Dalton doors sized correctly for Manhattan Beach’s mix of original single-car garages and newer three-car openings on the hill. From panel to opener to spring, one crew handles the whole job. Call (855) 763-8905 for a free measure and written estimate.
Why Manhattan Beach Homes Are Different
Manhattan Beach’s garage doors live in a salt fog. Nearly every property in 90266 sits within about a mile and a half of the Pacific, and that changes what wears out and how fast. Springs, hinges, and rollers on the west-facing flat blocks near the sand pit through years of life in half the time of the same parts a few blocks east on the hill. We don’t use inland hardware here. On ocean-side blocks we recommend galvanized or stainless springs and rollers, and more frequent lubrication, because the salt spray is the real driver of garage door wear, not temperature.
The housing stock makes every installation different. Original 1950s and 60s beach bungalows and duplexes sit next to much larger modern rebuilds with wide, tall garage openings. The rebuild boom means newer premium doors on old or reconfigured openings, and old single-car garages converted or expanded. Sizing, header conditions, and matching a door to a custom opening come up constantly. A 1962 single-car in the Sand Section and a 2019 three-car up on the hill need different door weights, spring tension, and track hardware. We size for the actual opening and the actual salt exposure, not a generic spec sheet.
Styles & brands we work with
Our Main Manhattan Beach Services
Homeowners in Manhattan Beach call us most often for two things: a door that won’t move, and an opener that won’t respond. Here’s how each works.
Garage Door Repair in Manhattan Beach
When a spring snaps on a west-facing street near the water, the door is down until it’s fixed. We work on LiftMaster, Chamberlain, Genie, Clopay, Amarr, Wayne Dalton, Craftsman, and Raynor, which means we’re working on the door you already have, not trying to sell you a brand we happen to carry. Manhattan Beach’s salt air corrodes springs and cables faster than inland, so our repairs use galvanized or stainless hardware on ocean-side blocks. The right repair, not just the fast one. Garage Door Repair in Manhattan Beach is its own dedicated service with its own crew and its own truck stock.
Garage Door Opener Repair in Manhattan Beach
Opener problems are usually electrical, not mechanical: a dead logic board, a stripped drive gear, a receiver that won’t pair with the remotes. We treat opener repair as its own dedicated service, which means the tech who shows up has the parts for LiftMaster, Chamberlain, Genie, and Craftsman opener systems on the truck. Marine layer humidity can corrode wall control contacts and circuit boards even when the door itself is fine. Garage doors are all we do, and openers are a big part of that. Garage Door Opener Repair in Manhattan Beach is the page to read for opener troubleshooting specific to this city.
What happens when you call
- 1
A real person answersNo phone trees — you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Garage Door Installation in Manhattan Beach
Garage Door Installation in Manhattan Beach comes down to matching the door to two things: the opening, which is often custom after a rebuild, and the salt air, which eats cheap steel skins and untreated hardware. We install Clopay, Amarr, and Wayne Dalton doors sized for the actual rough opening, with spring and track hardware selected for how close the garage sits to the Pacific. A door on a flat block off Highland Avenue needs different hardware than a garage on the east side of Sepulveda. Garage Door Installation is what our crew does every day. Here’s what it involves.
Garage Door Replacement
Signs you need it
The bottom panel is rusted through, the door sags when it’s up, or the tracks no longer align with the opening after a remodel.
What it costs in Manhattan Beach
A full garage door replacement in Manhattan Beach runs $700 – $2200 depending on size, material, and opening condition.
How we do it
We measure the rough opening, check the header and jambs, pull the old door and tracks, and install the new door with springs balanced to the panel weight and hardware chosen for the salt exposure on that block.
Garage Door Installation Service
Signs you need it
The builder left a rough opening, the door was removed during a remodel, or the old door is beyond repair and you want a clean, correctly sized install.
What it costs in Manhattan Beach
New door installation in Manhattan Beach runs $700 – $2200, with panel replacement for a damaged section at $250 – $500.
How we do it
We verify header and jamb dimensions, assemble and hang the panels, set the track, mount the opener if you have one, and balance the springs so the door opens level and stays where you put it.
Commercial Garage Door Installation
Signs you need it
The property has a roll-up or sectional door that’s undersized for current traffic, or a converted garage space that needs a heavier-cycle door.
What it costs in Manhattan Beach
Commercial garage door installation in Manhattan Beach typically falls in the $700 – $2200 range, with final cost driven by door size, cycle rating, and opener type.
How we do it
We assess the cycle count and clearance, recommend a door and opener rated for the actual daily use, and install with corrosion-resistant hardware appropriate for the coastal location.
Garage Door Seal Installation
Signs you need it
Daylight shows under the door, water pools at the bottom panel after a storm, or the rubber is cracked and stiff from salt.
What it costs in Manhattan Beach
Garage door seal installation in Manhattan Beach runs $120 – $240 for the bottom seal and side weatherstripping.
How we do it
We pull the old seal, clean the channel, install the new rubber bottom seal or side stripping, and check that the door closes tight against the new seal.
What Garage Door Installation Costs in Manhattan Beach
| Item | Typical range in Manhattan Beach |
|---|---|
| New door installation | $700 – $2200 |
| Panel replacement | $250 – $500 |
| Opener installation | $250 – $550 |
How long does garage door installation take in Manhattan Beach?
Most single-door installations finish in one day. Custom openings, rebuilt headers, or commercial doors can run into a second day. Call (855) 763-8905 for a schedule estimate.
Do I need a permit to replace a garage door in Manhattan Beach?
In most cases, replacing an existing door in the same opening does not require a permit. If the opening changes or the header needs work, Manhattan Beach may require plan review. Call (855) 763-8905 and we’ll walk through what applies to your property.
Brands We Service in Manhattan Beach
We work on the brand you already have. Our Manhattan Beach trucks carry parts for Genie, Clopay, Amarr, and Wayne Dalton, along with lift systems from LiftMaster, Chamberlain, and Craftsman. If we don’t have the part on the truck, we source it same week. Our brands page lists everything we service and install. Garage doors are all we do, so we keep the common parts stock that a general handyman wouldn’t carry.
See the difference
Before
After
Before
After
Before
AfterPricing for Garage Door Company in Manhattan Beach, CA
| Service | Typical range in Manhattan Beach |
|---|---|
| Spring repair | $180 – $340 |
| Cable repair | $130 – $250 |
| Opener repair | $120 – $320 |
| Opener installation | $250 – $550 |
| Panel replacement | $250 – $500 |
| Track realignment | $120 – $240 |
| Roller replacement | $110 – $220 |
| New door installation | $700 – $2200 |
| Garage door repair | $150 – $600 |
Salt corroded parts on ocean-side blocks can push a repair toward the high end. The price we quote is the price you pay. We agree on the number before any work starts, and we don’t add line items after the fact.
Neighborhoods We Serve in Manhattan Beach
We cover all of Manhattan Beach, including both 90266 and 90267. Here are the neighborhoods we work in most often:
- The Sand Section, including the flat streets near the beach where salt corrosion is fastest
- The Hill Section, where larger rebuilds and wider garage openings are common
- The Tree Section, with its mix of 1960s homes and newer custom builds
- Manhattan Village and the east side, where HOA doors and attached garages dominate
- The area around Polliwog Park, with older bungalows and converted single-car garages
We schedule by day across the whole city, and most Manhattan Beach visits happen within one business day of the call.
Service Area – Cities Near Manhattan Beach
Our crews cover Manhattan Beach and the surrounding South Bay cities. If you’re in Hermosa Beach, Redondo Beach, El Segundo, or Torrance, we’ll be at your door with the same brand coverage and coastal hardware knowledge we use in Manhattan Beach.
Serving Manhattan Beach, CA — Our Local Coverage Area
We’re based in the Manhattan Beach area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Garage Door Company in Manhattan Beach
We schedule Manhattan Beach appointments by neighborhood and day, with most visits happening within one business day of your call. Emergency spring and cable repairs are prioritized. Call (855) 763-8905 to get on the schedule.
Many Manhattan Beach HOAs, especially in the Tree Section and Manhattan Village, have design guidelines for door style and color. We can note the replacement specs your HOA needs before ordering. Call (855) 763-8905 and we’ll help you pull together what your association requires.
Yes. We service and install LiftMaster, Chamberlain, Genie, Clopay, Amarr, Wayne Dalton, Craftsman, and Raynor. The tech who shows up knows the brand you have, which means the repair is done right the first visit.
What happens when you call
- 1A real person answersNo phone trees — talk to a local garage door pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you — the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Manhattan Beach Customers Say
"Track was bent and two of the rollers were shot. He straightened what he could, swapped the rollers for nylon ones, lubricated everything, and had it done in about an hour."
— Jason Hoffman"Spring snapped at six in the morning with my car sealed inside and me due at work. Somebody was here by eight thirty with the right spring on the truck. Door's quieter now than it was before it broke."
— Vivian Kim"Logic board on a 15 year old opener. He was upfront that a new opener would cost less than the board plus labor, and he wasn't wrong. No pressure either way."
— Vikram Sharma